8
III. OPERATION
1. Unfolding, folding and transport of the chair.
2. Adjustment of the height of the chair and the angle of the seat
The height is adjusted by means of a height adjuster located on a steel cable (8) and the
angle of the seat(3) by means of a gas spring (2a) or a telescopic height adjustment (2).
3. Adjusting the position of the front shelf (5)
Press the 2 opposite buttons under the shelf and set it in the required position. To level it,
the mounting strap must be lengthened or shortened.
4. Face rest adjustment (7)
The adjustable face rest (7) is attached to the chair with two wing knobs. To move the face
rest, unscrew both knobs, set the face rest to the required height, and then tighten the
knobs again.
5. Sternum pad (9) (optional)
Recommended for pregnant women or those with large breasts. In order to assemble it,
detach the chest pillow (6) and replace it with the stenum pad by means of Velcro.
Place one hand on the
chest pillow
(
6
) and
the other on the seat (3),
open the chair by spreading the base
of the frame on the sides.
Fold similarly, paying attention that
the base of the frame / legs come
into contact with each other.
Incorrect folding of the chair
prevents from inserting it into the
carry case.
The chair can be transported in carry
case or through the engagement of
the belt conveying directly into the
frame of the chair.
