I. INTRODUCTION
The stationary massage tables HABYS Evero enable the physiotherapists to perfom correct, safe
and effective rehabilitation treatments, physiotherapy, physical therapy and massage aiming at
treating or alleviating the course of illnesses and the results of injuries/impairments. The frame
of the rehabilitation tables Evero enables an easy and complete access to the patient from each
side.
II. INSTALLATION
1. Unpacking
•
Unpack the table.
•
Check whether it has not been damaged during transportation. Should the table be damaged,
do not install the table and inform the seller.
2. Connecting to the power network
Before inserting the plug into the mains socket, you should check the following:
•
if the socket has correct grounding and if it corresponds to the binding provisions;
•
if the socket may sustain a load of the maximum power output of the device, given in the
chart of the Technical Data;
•
if the voltage of the electrical current in the mains is in accordance with the data given in the
chart of the Technical Data;
•
if the plug fits into the socket. Otherwise the socket needs to be replaced.
!
Do not install the devices in the open air. Electric actuators may work not longer
than 2 minutes. Restart is possible after 18 minutes of rest. After installation of the
table the mains socket should be easily accessible. Do not use the extension cords.
The cable should not be bent. The cable of the power supply may be replaced only
by an authorised specialist. No independent repairs of the electric actuators should
be performed. Avoid direct sunlight, UV radiations, rain, extensive dust, moisture.
Attention!
The manufacturer bears no responsibility for the product if the above-mentioned
rules are not followed.
