page
5
Taking Care of Your YEOMAN Zinc Tops
Help reduce the chance of staining by wiping up any spills immediately with a soft dry cloth, before wiping
the whole table surface down with a mild soapy solution. Dry thoroughly with a clean cloth to avoid water
marks and streaking.
Avoid ring marks by using coasters.
Don’t use indoor furniture outside. Continual exposure in a damp or wet environment will cause corrosion.
Cleaning Instructions for Zinc Tops
Wipe the whole surface down regularly with a mild soapy solution and dry thoroughly with a clean cloth to
avoid water marks and streaking.
Regularly dust the metal legs with a clean dry cloth to avoid the build-up of dirt and dust that can cause
small pits in the paint finish.
Never use abrasive cleaners on your YEOMAN piece as they will scratch its soft surface.
Do not clean with products containing the following: - Acetone (e.g. nail varnish remover), Ammonia (e.g.
bleach) or sodium hydroxide (e.g. Caustic soda and oven cleaners).
The use of furniture polish or spray is not necessary or recommended. If you want to polish the surface,
use good-quality beeswax.
Don’t be tempted to spot clean as this can lead to patchy results.
General Care Advice - please read carefully
Metal leg elements
We give below some suggestions for metal furniture care.
Dust regularly to avoid dirt build-up. Dust can cause the surface to pit.
Repair damaged surfaces immediately to prevent the metal underneath from rusting.
WARNING
Don’t use harsh abrasives to clean any metal surfaces.
Do not allow spillages to stay in the surface for long.
Do not clean with products containing the following: - Acetone (e.g. nail varnish remover), Ammonia (e.g.
bleach) or sodium hydroxide (e.g. Caustic soda and oven cleaners).
Don’t use indoor furniture outside. Continual exposure in a damp or wet environment will cause corrosion.
Periodically check that there are no loose screws on the unit.
