Habitat Pacha 823691 Quick Start Manual Download Page 2

 

 

Pacha

 – 09/2020

 

 

EN 

This manual contains important information that should be retained for future reference. 
Self-assembly.  
Warning! Keep children out of the mounting area. Leave the plastic bags out of reach. Small parts are a choking hazard. 

 
Materials

 

Aluminum powder coated. 

 
Assembly instruction 

Before beginning assembly, identify all components using the manual. 
In order not to mislead components, do not throw the packaging before completing the full assembly. 
This product must be installed by an adult. 
Plan to assemble the furniture as near as possible to where it will be installed. 
Assemble on a clean, flat surface. 
Assemble all components firstly, then tightly fix all screws. 

 
Recommendations for use 

This product is designed for outdoor use. 
It is recommended to cover or store the product in a clean and dry place away from the bad weather and winter. 
Do not leave the product in contact with puddles or on wet ground. 
Do not leave stagnant water on the product. 
Do not stand on the product. 
Do not sit on the product. 
This table is not meant to be used with an umbrella. 
Otherwise, it must be used with a foot of parasol sufficiently weighted. 

 
Maintenance 

In order not to damage the surface, it is recommended not to deposit a hot or wet object directly on the table. 
Do not use magazines or newspapers as trivets. The ink used may leave traces that can permanently stain the surface of 
the table. 
To avoid the appearance of marks, do not leave any object still for more than 2 months. Sponge  up spills immediately 
with a cloth. Then wipe the surface with a clean, dry cloth. 
Never  allow  a  layer  of  moisture  to  remain  on  the  surface  of  the  product  for  long  periods  of  time,  especially  in  bright 
sunlight. 
Do not place the product near a heat source (radiator, fireplace, barbecue ...) or a source of moisture. Heat and moisture 
can damage the product. 
Do not use abrasive products. 
Cover and store the product in a clean, dry place, protected from the weather and winter. 
 
Aluminum part 
Dust regularly with a dry cloth. 
Clean with dishwashing liquid and wipe with a clean, dry cloth. 
Maintain with circular motions. 
Avoid contact with abrasive materials that may damage the surface. 
 

Keep the label with lot number, it may be useful in case of complaint. 

 
If  you  have  any  comments  or  suggestions  regarding  this  product,  assembly  instructions  or  service  received,  please 
enquire  at  your  nearest  store  or  contact  us  on  our  website  at:  www.habitat.eu  or  write  to  this  address:  HABITAT,  70 
AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE 

 

Reviews: