12
When prompted
to
use
buttons to toggle
to “y”. Press “Fan”
to continue.
Press & hold “Mode”
& “Fan” until a sound
is played (3 seconds),
then release.
The display shows
the number of
base modules
currently paired.
Press “Mode” to
scroll back to the
Schedule Param-
eter and use the
button to
toggle schedule to
“Y”. Press “Fan”
to confirm.
Emergency Heat Setting:
Schedule Setup:
Use
buttons
to enable (y) or disable (n)
Emergency Heat. If the
room temperature falls
below the Frost Protect
Setpoint
(Administrative
Parameter)
, emergency
back-up heat will be
activated.