Reflet
- 09/2022
2
BC
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Mod. A
Table top: smoked mirror.
Mod. B
Table top: pink mirror.
Structure: iron powder coated and medium density fiberboard
(MDF).
Feet: iron powder coated.
Assembly instructions
In order not to lose components, do not throw the packaging before
completing the full assembly.
Before beginning assembly, identify all the components using the
manual.
Place the mirror part delicately on a clean and flexible surface free
from defects which could scratch or break it.
This product must be assembled by an adult.
Plan to assemble the product as close as possible to where it will
be installed.
Assemble on a clean, flat surface.
Do not use an electric screwdriver.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the product.
Maintenance
In order not to damage the surface, it is recommended not to place
hot or wet objects directly on it.
Do not use magazines or newspapers as a trivet. The ink used can
leave traces which can permanently stain the table surface. To
avoid the appearance of marks, do not leave any object immobile
for more than 2 months. To avoid scratches, do not use a recurring
sponge or grain detergent. Mop up spills immediately with a clean,
dry cloth.
Do not place the product near a heat source (radiator, fireplace,
etc.) or a source of humidity. Heat and humidity can damage the
product. Avoid direct and prolonged exposure of the product to
solar radiation: the colors could fade.
Do not use abrasive products.
Mirror part
Do not use abrasive products.
Do not hit tempered glass parts with a hard or sharp object.
To clean glass parts, use a damp cloth and, if necessary, washing
up liquid or mild soap.
Metal part
Dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
Keep the label with lot number, it may be useful in case
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address:
HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
