habitat et jardin Vana 6, Manual

Page: 8 / 8

This LED floating Ball has a memory storage function (if the batteries are not fully exhausted) so that when you press the
ON/OFF button, the lighting will maintain the same settings.
If the battery is exhausted there will be no memory storage function and it will revert to the default “ Smooth ” setting.
Mode Selection by Remote Control
Remove the small plastic sheet from the battery cover before using the remote control.
Please return this plastic sheet to remote control when not using to save battery power.
Notice: Each time you need to turn on product before activating remote control function.
Replace battery:
If the remote control fails to activate the light, replace the battery by:
1. Remove the old battery by pushing the part
①
to the right at the back of the remote
control and then pull the part ② out of the remote control.

Take notice of the “+” and “–” direction of the battery in correct direction.
 Make sure that the new battery is inserted the right way.
4. Dispose of the old battery responsibly.
Notice: Each remote control includes a CR2025 battery,if run out power,you need to buy
it by yourself.
Maintenance for Product and Accessories
Cleaning: It is recommended that after use the products are turned off , rinsed using clean water and dried using a soft cloth.
When not using: Store these products out of reach of children and direct sunlight when not in use.
Save battery power for remote : Please return this plastic sheet to remote control when not using to save battery power.