background image

 
 

 

 

Warning 

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE, 

We cannot be liable for any damages caused by failure to observe these instructions. 
 

IMPORTANT SAFETY INSTRUCTIONS 

READ CAREFULLY-The infrared heater is designed for safe operation. Nevertheless, installation, 
maintenance and operation of the heater can be dangerous. Observing the following procedures 
will reduce the risk of fire, electric shock, injury to persons and keep installation time to a 
minimum. Save these instructions for future use. 
 
1.

 

Read all instruction before using this heater. 

2.

 

Remove the unit from its packaging and check to make sure it is in good condition before using.  

3.

 

Do not let children play with parts of package (such as plastic bags). 

4. Check the household voltage to ensure it matches the heater’s rated specification. 

 

5. Check the power cord and plug carefully before use, to make sure that they are not damaged. 

6. Before unplugging the power cord, be sure to turn off the power, when turning on the heater, 

be sure your hands are dry to prevent from electric shock. 

7.

 

This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If 

provided, use handles when moving this heater. Keep combustible materials, such as furniture, 

pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9  m) from the front of the heater 

and keep them away from the sides and rear. 

8.

 

Extreme caution is necessary when any heater is used by or near children or invalids and 

whenever the heater is left operating and unattended. 

9. Do not use near or in the immediate vicinity of a bath or swimming pool or any source of liquid. 

10. To protect against electric shock, do not immerse cord or plug in water or any other liquid. 

11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may 

cause an electric shock, fire, or damage to the heater. 

12. Always unplug the heater when not in use. 

13. Connect to properly grounded outlets only. 

14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or 

relocatable power tap (outlet/power strip). 

15. Do not allow cord to overhang the countertop where it can be easily pulled by children. 

16. Do not put fingers or foreign objects into the grill while in operation. 

17. Do not leave the appliance unattended when in use. 

Summary of Contents for Tornado


















Reviews: