37
4. Inflate the spa tub
by pressing the “Jet” button.
When the spa is properly inflated, press the “Jet” button to shut off the
bubbles.
Attention
1
:
Do not over inflate.
Attention
2
:
If you want inflation when the spa has filled water, you
must put on the Jets 2-3minutes b
y pressing the “Jet” button first, and then
operate according to step 2-5 above.
5. Remove the inflation hose and screw the valve tight.
6. Remove the inflation hose from the air outlet and screw the nut tight.
7. Screw the filter cartridge onto the water inlet on the spa wall by turning it
clockwise.
8. Fill the spa using a garden hose to fill to the water level printed on the spa wall.
9. Place the cover onto the spa, fasten the zipper.
2
3
4
