Step 1 Assembling The Frame
1.-1
Connect 2pcs top bar S, using bolt set (bolt Gx1 + washer Kx1 +
spring washer Mx1 + domenut Px1).
1.-2
Connect the top bar S, top leg T, and clamp (GG), using bolt set
(bolt Ix2 + washer Kx2 + spring washer Mx2 + domenut Px2)
on top bar and (bolt Gx4 + washer Kx4 + spring washer Mx4 +
domenut Px4) on top leg.
1.-3
Attach the side stay bar W to leg ( T & U), using bolt set
(bolt Ex2 + washer Jx2 + wave washer Nx2, spring washer Lx2 + domenut Ox2)
1.-4
Insert plastic cap (MM1) into both sides of top bar (S) & plastic cap (MM2)
into leg (T)
Step 2 Assembling The Glider
2.-1
Combine glider bracket Z to top bar S. using bolt set
(bolt Ax1 + washer Jx2 + spring washer Lx1 + domenut Ox1).
2.-2
Insert plastic bearing (DD) into both sides of the handle tube (V)
and attach to glider bracket (Z), using bolt set (bolt Hx1 + washer Kx1 +
spring washer Mx1 + domenut Px1)
2.-3
Attach lower glider leg tube X to glider handle tube V using bolt set
(bolt Cx1 + washer Jx1 + spring washer Lx1 + domenut Ox1).
Page 8 of 51
