background image

Habasit Italiana S.p.A. 
Vittorio Veneto 31029 (TV) 
Tel.: ++39(0)438.9113 
Fax. ++39(0)438.200545 

Hot Press PM-306 

 

Author: S.D.T. 

/KM 

REGULATIONS AND GENERAL WARNING NOTES

 

Edition: 02/2005 

Page 

A-9

 

Replaces: 01/2002 

 
 

SAFETY DEVICE 

Eliminates or reduces the risk, either alone or in association with a 
guard. 

 

INTERLOCK DEVICE 
(INTERBLOCK) 

An mechanical or electrical or other kind of device whose aim is to 
prevent elements of the machine from functioning under specified 
conditions (generally until the guard is closed).  

 

PROTECTION 
STRUCTURE 

A physical obstacle such as a guard or part of the machine, that limits 
the movement of the body and/or one of its parts. The safety distances 
have been determined on the basis of the requisites at point 4.1.1 of the 
standard UNI EN294.  

 

SAFETY DISTANCE 

The minimum distance a protective structure must be positioned with 
respect to a dangerous area. The safety distances have been 
determined on the basis of the requisites at point 4.1.1 of the standard 
UNI EN294.  

 

INDIVIDUAL 
PROTECTION DEVICE 

Safety devices such as gloves, shoes, helmet, visor, earplugs etc. aimed 
at protecting parts of the body.  

 

CONTROL CIRCUIT 

A circuit used to control the working of the machine and protect the 
power circuits.  

 

CONTROL DEVICE 

A device inserted into a control circuit and used to control the working of 
the machine (e.g. position sensors, manual control switches, relays and 
electromagnetic valves).  

 

 

Hot-pressing device  PM-306 

 

Summary of Contents for PM-306
















































































Reviews: