11
9.1.2. Setting the time and date
↱
+ -
change
14:39:28
date/time
fr, 13.09.2013
Procedure:
By pressing the
“Ok”
button on the right, the required date and time are set with the
“Plus”
and
“Minus”
buttons in the middle.
The
“Ok”
button is used to switch from the date to the time setting.
The setting is saved by pressing the
“OK”
button.
To exit the function, press the
“On/Off”
button.
Summer and winter time are not automatically detected.
9.1.3. Setting the language:
l001
↱
↓
OK
>deutsch <
english
main menu
language
Procedure:
The required language can be set with the
“Plus”
or
“Minus”
buttons.
The setting is saved by pressing the
“OK”
button.
To exit the function, press the
“On/Off”
button.
9.1.4. Heating curve - How it works
h003
↱
+ -
OK
( 2 ) 2
main menu
heating curve
set factor
Setting range of the heating curve from
1
to
4
.
Factory setting:
2
The value to be set is based on the size of the room being heated.
Guide values:
Room size 20m² -
Value 1
Room 25m² -
Value 2
Room 30m² -
Value 3
Room bigger than 30m² -
Value 4
A bigger value (bigger than 3) should also be set with older chimneys – this prevents excess build-up of condensation
in the chimney.
Procedure:
The required value can be selected with the
“Plus”
or
“Minus”
buttons.
The setting is saved by pressing the
“OK”
button.
To exit the function, press the
“On/Off”
button.
