HAAS + SOHN HSP 4.0-F3, Equipment Sheet, Page: 5 / 24

T
echnical
data
GB
1
1. Technical data
HSP 4.0–F3 459.08
Nominal
output
Partial output
50%
Partial output
30%
Heat output range: 8,5 kW 4,0 kW 2,4 kW
Nominal heat output: 8,5 kW
Test conditions defined by norm:
EN 14785
Height:
1210 mm
Width: 540 mm
Depth:
557 mm
Weight: 175 kg
Diameter of flue elbow: 80 mm
Flue gas temperature:
167 °C 100 °C 74 °C
Testing transport pressure:
12 Pa 7 Pa 6 Pa
Flue gas flow rate in g/s: 5,6 g/s 3,8 g/s 2,7 g/s
CO level in flue gas (%) (min./max.)
0,002 % 0,009 % 0,024 %
Efficiency:
91,9 % 94,2 % 95,3 %
CO level in flue gas: 24 mg/Nm³ 116 mg/Nm³ 295 mg/Nm³
NOx level in flue gas: 65 mg/Nm³ 72 mg/Nm³ 68 mg/Nm³
OGC level in flue gas: 3 mg/Nm³ 2 mg/Nm³ 11 mg/Nm³
Proportion of dust in flue gas: 9 mg/Nm³ 10 mg/Nm³ 18 mg/Nm³
Contents of storage container (pellet tank): ca. 17 kg
Duration of burn with one charge (min./max.):
ca. 9 h ca. 18 h ca. 18 h
Permitted fuel: Low-dust wood pellets
diameter: 6 mm
to Ö-Norm M 7135, DIN plus, EN plus-A1
length: max. 30 mm
Room heating capacity to Ö-Norm M 7521: max. 230 m³
Electricity supply: 230 V (50 Hz)
Electricity supply input:
in normal operation:
21 W
Electric ignition (for max. 15 minutes on ignition):
max. 380 W
Fuses for the ignition, screw conveyor motor, induced
draught, (F1)
T 3,15 A, 250 V
Safety distances
Minimal distances from flammable materials:
side: 10 cm
rear:
10 cm
front (radiation area): 50 cm