Haas+Sohn Pelletto III 419.08, Equipment Sheet

Page: 7 / 15

7
2. Technical data
Pelletto III 419.08 Pelletto III 434.08
Heat output range: 2,4 – 8,3 kW 2,4 – 8,3 kW
Nominal heat output 8,0 kW 8,0 kW
Height: 1001 mm 1193 mm
Width: 557 mm 557 mm
Depth: 493 mm 493 mm
Weight: 96/143/115 kg 106/137 kg
Diameter of flue elbow: 80 mm 80 mm
Flue gas temperature 172°C 172°C
Minimum supply pressure: 11 Pa 11 Pa
Flue gas flow rate in g/s 5,6 g/s 5,6 g/s
CO level in flue gas (%) (min./max.) 0,0012/0,01 % 0,0012/0,01 %
Efficiency: 90/97,2% 90/97,2%
CO level in flue gas: 15 mg/Nm³ 15 mg/Nm³
NO
x
level in flue gas: 143/- mg/Nm³ 143/- mg/Nm³
OGC level in flue gas: <5 mg/Nm³ <5 mg/Nm³
Proportion of dust in flue gas: 9/- mg/Nm³ 9/- mg/Nm³
Contents of storage container (pellet tank): about 17 kg about 32 kg
Duration of burn with one charge (min./max.): about 10 hrs / 30 hrs about 20 hrs / 60 hrs
Permitted fuel: Low-dust wood pellets to Ö-Norm (Eco-
standard) M 7135, DIN 51731, EN 14961-2 Diameter: 6 mm,
Length: max. 30 mm Diameter: 6 mm,
Length: max. 30 mm
Room heating capacity to Ö-Norm M 7521: max. 230 m
3
max. 230 m
3
Room heating cap’y to DIN 18893, constant heating: 250m
3
/145m
3
/98m
3
250m
3
/145m
3
/98m
3
Room heating cap’y to DIN 18893, timed heating: 165m
3
/95m
3
/65m
3
165m
3
/95m
3
/65m
3
Electricity supply: 230 V (50 Hz) 230 V (50 Hz)
Electricity supply input (min./max.)
in normal operation:
Electric ignition (for max. 15 minutes on ignition): 30 to 50 W
400 W 30 to 50 W
400 W
Electronics fuses: (F3) T 0.315 A, 250 V T 0.315 A, 250 V
Fuses for the ignition, screw conveyor motor, induced
draught, (F1) T 3,15 A, 250 V T 3,15 A, 250 V