3
Test number:
Stove unit: Opus 186.18:
RRF Essen
RRF-29 06 1188
Fitting the combustion chamber lining for the
HAAS+SOHN Opus 186.18/1-AL
Installation of the combustion chamber liner:
Note: Labels with the short designations are attached to the mounting parts.
1. Install first row: first RSC (rear block centre) (top groove rearward), then rear blocks left and right (top groove
rearward) and front blocks.
2. Insert bottom blocks 1, 2 and 3.
3. Insert ash pan (5) and grate (9).
4. Install second row: rear blocks and lateral blocks.
5. Insert insulating block (16) and draught deflector plates (10+21).
Installation of the insulating block:
Insert insulating block (16) with the short edge into the upper sheet steel
groove (see drawing) and let slip into the lower sheet steel groove.
Installation of the draught deflector plate:
Insert draught deflector plate (10) slantwise (bevelled corners at the
back) and place it on the lateral sheet steel angles, then lift the front edge and place it on the support plate.
Important:
Push the draught deflector plate (10)to the front until the limit stop is reached!
Push the draught deflector plate lower(21)to the back until the limit stop is reached!
Important
: After cleaning of the appliance, or before returning it to service, checks must be carried out to ensure
that the baffle plates are in the correct position (see diagram).