![background image](http://html.mh-extra.com/html/haan/select-si-60/select-si-60_instruction-manual_575849006.webp)
4
Operating Instructions
Care & Maintenance
1.
Turn your floor sanitizer off and unplug from
the electrical outlet.
2.
Wrap power cord around cord hangers.
3.
Let your floor sanitizer cool for five (5) minutes
before removing the ultra-microfiber pad and
before emptying the water tank.
4.
Always empty the water tank when you have
finished using your floor sanitizer.
5.
Never leave ultra-microfiber pad on floor
sanitizer when you have finsihed using it.
Always remove the ultra-microfiber pad and
wash in warm water with a mild detergent.
Never use bleach or fabric softener when
cleaning the ultra-microfiber pad.
The ultra-microfiber pad can be washed in a
washing machine and dried in a clothes
dryer but on low heat.
To decrease pad wear, we recommend the
pad be hung to dry for 24 hours.
6.
Wipe your floor sanitizer with a damp cloth to
clean. Never immerse the sanitizer in water
or any other liquid.
7.
In order to keep your floor sanitizer in good
condition, we recommend that you clean the
water tank once a month to eliminate calcium
deposits. Add eight ounces (8 oz) of water to
the water tank and insert 1 packet of Fresh
Rinse™ Lime and Scale Remover. Shake to
loosen any deposits. Place unit on resting
mat without pad, turn unit on and allow water
to steam until water in tank is depleted.
Do
not use vinegar or other decalcifying
substances in the floor sanitizer
water tank.
IMPORTANT
Always ensure that your
floor sanitizer is
UNPLUGGED
from the
wall receptacle prior to
cleaning or emptying the
water tank.
CAUTION
CAUTION
Do not immerse your
floor sanitizer in water
or any other liquid.
Always operate floor
sanitizer by gripping
the handle. Do not
grip by the pole.
Helpful Hints
1.
Always use a vacuum or sweep before
sanitizing your floors.
2.
The easiest way to use the machine is to
tilt the handle to a 45º angle and clean
slowly 2-3 yards at a time.