manualshive.com logo in svg

Haag-Streit LI 900, Instructions For Use Manual, Page: 10 / 20

Share
Download
Haag-Streit LI 900 Instructions For Use Manual Download Page 10

10

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220591‑04110 – 2021 – 08

5 Commissioning

5.1 Switching on the device

• Connect the power supply to the mains and press the rocker switch. When the

device is switched on, the green lamp lights up in the rocker switch.

• Set the knob of the illumination control to a position between ’1’ and ’10’.

6 Operation

The light sources are switched on if the knob of the illumination control IC01 is in a

position between ’1’ and ’10’. In the 0 position, the light sources are switched off.

(Standby).

• Slit and background illumination can be set

separately with the potentiometers.

• The blue dial on the illumination head can be

used to switch the background illumination

between white and blue light.

29. Background illumination knob

30. Slit illumination knob

WARNING!

Illumination control cables can only be used for connecting an

illumination control IC01 and a power supply PS-LED. Only connect

illumination controls to suitable devices!

6.1 Reduced operation

To guarantee a long service life of the light sources, the output of the background

illumination is reduced slightly once the maximum operating temperature is reached.

After a short cooling time, the full output can be used again. This operating state is

only achieved if both light sources remain switched on together for a prolonged

period and are therefore outside the specified temperature range.

6.2 LED indicator Illumination head

1)

2)

3)

Background

illumination

Polarity

reversal

Slit lamp

illumination

Operating state

Standby mode

Green, pulsing

x

Green, pulsing

Normal operation

Slit and background

illumination on

Green

x

Green

Only slit illumination on

Green, pulsing

x

Green

Only background illumination

on

Green

x

Green pulsing

Reduced background

illumination operation

High LED temperature, thus

reducing background

illumination operation

Green, flashing

x

Green, flashing

6.3 LED indicator (PS-LED power supply)

Normal operation

Green

Summary of Contents for LI 900





















Reviews:

No comments