Haag-Streit Clement Clarke Ophthalmic BA 904 Instructions For Use Manual Download Page 2

Page: 2 / 28

Introduction

Thank you for choosing the BA 904 portable slit lamp device. Provided you comply

carefully with the instructions for use, we guarantee the reliable and unproblematic use

of the product.

Intended purpose

A slit lamp bio-microscope is intended for use in eye examinations. A light source is

projected towards the eye, this is then viewed using binocular magnification. It is used

to aid the diagnosis and documentation of diseases or trauma that affect the structural

properties of the eye.

Contraindications

There are no known contraindications for tests with this device. Appropriate

professional judgement and caution are necessary.

Manufacture

The BA 904 portable slit lamp is manufactured in the UK by Haag-Streit UK (HS-UK).

Clement Clarke Ophthalmic is a brand of HS-UK, collectively representing the company’s

own range of manufactured ophthalmic diagnostic devices and products. Information on

the Clement Clarke Ophthalmic product range can be found on the HS- UK website at

https://hsuk.co/CCO.

Servicing & maintenance

For information on the servicing or repair of the BA 904 portable slit lamp, users will need

to contact the HS-UK Service Division, at [email protected]. Information on the

HS-UK Service Division can be found on the HS-UK website at

www.haagstreituk.com/service

Please read this instructions for use manual carefully before commissioning this

product. It contains important information regarding the safety of the user and

patient.

Federal law restricts this device to sale by or on the order of a physician

or licensed practitioner.

Summary of Contents for Clement Clarke Ophthalmic BA 904





























Search results

Summary of Contents for Clement Clarke Ophthalmic BA 904

Reviews:

Related manuals for Clement Clarke Ophthalmic BA 904

Brands by name

Popular brands

Haag-Streit Clement Clarke Ophthalmic BA 904, Instructions For Use Manual

Search results

Summary of Contents for Clement Clarke Ophthalmic BA 904

Reviews:

Related manuals for Clement Clarke Ophthalmic BA 904

Brands by name

Popular brands