manualshive.com logo in svg

Haag-Streit BX 900, Instructions For Use Manual, Page: 21 / 28

Share
Download
Haag-Streit BX 900 Instructions For Use Manual Download Page 21

21

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220449‑04090 – 2021 – 08

9.5 Cleaning and disinfection

The Haag-Streit slit lamps and their accessories can, if required, be carefully wiped

down with ready-for-use disposable 70% ethanol disinfectant wipes. Surface-friendly

disinfectants (containing aldehyde or aldehyde-free) are also permitted, such as

Kohrsolin FF.

WARNING!

• The preparation instructions provided do not apply to tonometer

measuring prisms.

• Tonometer measuring prisms must be prepared in accordance with

a different manual.

• Too strong or aggressive disinfectants or cleaning liquids e.g.

hydrogen peroxide will damage the finish and coating of the device.

• Do not use sprays.

• Observe the manufacturer's safety instructions.

• Do not use any cloths that drip.

• Wring out any soaked cloths before use when necessary.

• Ensure that no liquid penetrates the device.

• Comply with the stipulated exposure time.

• Clean optical surfaces after disinfection with a very soft cloth.

NOTE!

IP code: IPX0 (device is not protected against liquids)

9.6 Replacing the illumination mirror

The mirror can be most easily accessed if the microscope is turned away from the

illumination and the illumination inclined two points.

WARNING!

Only use mirrors with a LOT number.

9.7 Dust cover

We recommend protecting the slit lamp with a dust cover when

not in use.

10 Appendix

WARNING!

• Do not modify this device without authorization of the manufacturer.

Installation and repairs may only be performed by trained

specialists.

• Contact your Haag-Streit representative for installation, repairs and

modification work on the system. The contact details are available at

www.haag-streit.com.

• Only original Haag-Streit spare parts may be used.

10.1 Accessories / functionals parts / detachable parts /

consumables

Components

REF

Adapter for inclined eyepieces 20°

1400305

Contrast enhancing filter (yellow)

1400306

EyeSuite Capture option

7220442

Short mirror

1001591

Fine brush for cleaning the optics

1001398

Diagnostic contact lenses

Please refer to the instructions for use 'Contact

lenses, Goldmann/Diagnostics/Laser'

Summary of Contents for BX 900





























Reviews:

No comments