User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 5 Call Service Configuration
5-25
Step
Configuration
task
Description
Remarks
—
Delete one or
more
telephone
numbers
bound to a
user ID
1)
Select [System View/Location
Server/ONLY Service/
the user ID to be
configured
/User Number Table] in the
navigation tree.
2) Select the telephone number to be
deleted in the configuration window and
click <Delete>.
To batch delete telephone numbers bound to
the user ID, select the desired numbers while
pressing and holding <Ctrl>, and then click
<Delete>.
Command:
undo tel-number
(ONLY service
view)
Optional
—
Delete one or
more user IDs
1)
Select [System View/Location
Server/ONLY Service] in the navigation
tree.
2) Select the user ID to be deleted in the
configuration window and click
<Delete>.
To batch delete user IDs, select the desired
IDs while pressing and holding <Ctrl>, and
then click <Delete>.
Command:
undo only
(LS view)
Optional
—
Configure
other call
services
Return to
XE IP PBX Configuration Overview
.
5.13 Time Limit Call Service
5.13.1 Introduction to Time Limit Call Service
The time limit call service is used to control the call duration within a specific period. If
the time limit call service is enabled for a subscriber, all calls that this subscriber makes
cannot exceed the time limit; otherwise the call will be terminated automatically. The
call duration is determined by the service settings on both the caller and callee sides.
