User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 5 Call Service Configuration
5-24
Step
Configuration
task
Description
Remarks
—
Configure
other call
services
Return to
XE IP PBX Configuration Overview
.
5.12 ONLY Service
5.12.1 Introduction to ONLY Service
The one number link you (ONLY) service can be used to assign an ID, which uniquely
identifies a user. Some or all of the user’s numbers can be bound to the user ID. When
a call is made to the user ID, telephones of all numbers bound to the ID will ring. The
user can pick up any phone to start the conversation, and other phones stop ringing at
the same time.
5.12.2 Configuring ONLY Service
Table 5-19
Configure the ONLY service
Step
Configuration
task
Description
Remarks
1
Add a user ID
1)
Select [System View/Location
Server/ONLY Service] in the navigation
tree.
2) Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
3) Set the user ID and click <Ok>.
To batch add subscriber IDs, click <Add> in
the [Add List Item] dialog box and add IDs as
desired.
Command:
only
(LS view)
Required
2
Bind one or
more
telephone
numbers to a
user ID
1)
Select [System View/Location
Server/ONLY Service/
the user ID to be
configured
/User Number Table] in the
navigation tree.
2) Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
3) Set the desired telephone number and
click <Ok>.
To batch bind telephone numbers to the user
ID, click <Add> in the [Add List Item] dialog
box and add numbers as desired.
Command:
tel-number
(ONLY service view)
Required
