2-12
Figure2-13 Connecting the power adapter for the WX1804H-PWR access controller
Connecting the AC power cord for the
WX1810H-PWR/WX1840H access controller
1.
Make sure the device is reliably grounded.
2.
Connect one end of the AC power cord to the AC power receptacle on the device.
3.
Connect the other end of the AC power cord to the AC power source.
4.
Observe the LEDs on the device to verify that the power cord is connected correctly. For
information about LEDs, see "Appendix A Chassis views and technical specifications."
Figure2-14 Connecting the AC power cord for the WX1810H-PWR access controller
Verifying the installation
Verify the following items before you power on the device:
•
There is enough space around the device for heat dissipation.
•
The power source specifications are as required by the device.
•
The grounding cable, console cable, power cord, and interface cables are connected correctly.
•
If part of the network cable for a port is routed outdoors, verify that a network port lightning
protector is used for the port.
•
If the power line is routed from outdoors, verify that a surge protected power strip is used for the
device.
