50
Follow these steps to configure traffic policing for all traffic of the specified online users:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter user profile view
user-profile
profile-name
Required
The configuration made in user
profile view takes effect when the
user-profile is activated and the
corresponding users are online.
For more information about user
profiles, see
User Profile
in the
Security Configuration Guide
.
Configure the CAR
action
qos car
{
inbound
|
outbound
}
any
cir
committed-information-rate
[
cbs
committed-burst-size
[
ebs
excess-burst-size
] ]
[
pir
peak-information-rate
]
Required
The conforming traffic is permitted
to pass through, while the
exceeding traffic is dropped.
Support for the keywords of the
command varies by AC model. For
more information, see
QoS
in the
ACL and QoS Command
Reference
.
Return to system view
quit
—
Activate the user
profile
user-profile
profile-name
enable
Required
Inactive by default
NOTE:
If a user profile is activated, you cannot modify or remove the CAR policy applied to it.
Configuring line rate
NOTE:
Support of the H3C WX series access controllers for this feature may vary by AC model. For more
information, see
Compatibility Matrices
.
The line rate of a physical interface specifies the maximum rate of outgoing packets.
Follow these steps to configure the line rate:
To do…
Use the command…
Remarks
Enter system view
system-view
—
