1-1
1
Preparing for installation
Safety recommendations
WARNING!
Only professional technical engineers are allowed to install and remove the AP and its accessories.
Read the safety instructions for the AP carefully before installing or servicing it.
To avoid possible bodily injury and equipment damage, read the following safety recommendations
before installing the AP. Note that the recommendations do not cover every possible hazardous
condition.
•
Take adequate safety measures to avoid bodily injury and device damage.
•
Place the AP in a dry and flat location and take anti-slip measures.
•
Keep the AP clean and dust-free.
•
Do not place the AP in a moist area and avoid liquid intrusion.
•
Keep the AP and installation tools away from walkways.
Site preparation
Before installing the AP, examine the installation site and make sure the AP will operate in a
favorable environment. Make sure the temperate and humidity at the installation site meet the
requirements in
Table 1-1 Temperature and humidity requirements
Item
Specification
Operating temperature
0°C to 50°C (32°F to 122°F)
Storage temperature
–40°C to +70°C (–40°F to +158°F)
Operating humidity (RH), noncondensing
5% to 95%
