H3C WA6638, Manual

Page: 6 / 14

2-3
4. Insert the screws through the installation holes in the mounting bracket into the holes in the
wall. Fasten the screws to secure the mounting bracket to the wall, as shown in
Figure 2-5 .
Figure 2-5 Attaching the mounting bracket to the wall
5. Feed cables through the cable holder, connect the cables to the AP, and then attach the cable
cover to the AP, as shown in
Figure 2-6 .
Figure 2-6 Connecting the cables to the AP
6. Position the three screws on the AP into the keyhole slots in the mounting bracket and then
slide the AP down until it clicks into place, as shown in
Figure 2-7 .