6
Connecting the AP to a power source
You can supply power to the AP by using a local power source or through 802.3af-compliant PoE as
required. Before powering the AP, make sure the local power source or the power sourcing
equipment (PSE) is reliably grounded.
Connecting a PoE power source
To power the AP through PoE, use an Ethernet cable to connect an Ethernet port on a PoE switch to
the Uplink/PoE port on the AP.
Figure 12 Connecting the AP to a PoE power source
Connecting a local power source
Connecting a local power source by using a power adapter
You can use a power adapter to connect the AP to a local power source. No power adapter is
provided with the AP. Order as required.
To use a power adapter, make sure it is the LPS or PS2 type.
describes the power adapter specifications.
Table 2 Power adapter specifications
Item
Specification
Input
100 VAC to 240 VAC
Output
+54 V
0.74 A
Output power
40 W
