H3C WA2612-AGN Web-Based Configuration Manual Download

Page: 110 / 447

Click the

icon for the port to be modified to enter the page as shown in

Figure 96

Modify a port

Configure the port as described in

Table 47

Click

Apply

Table 47

Configuration items

Item

Description

Port

Display the port to be modified.

Untagged Member

Display the VLAN(s) to which the port belongs as an untagged member.

Tagged Member

Display the VLAN(s) to which the port belongs as a tagged member.

Member
Type

Untagged. Set the target member type of the port.

Select the

Untagged

Tagged

, or

Not a Member

option:

•

Untagged

: Indicates that the port sends the traffic of the VLAN with the VLAN tag

removed.

•

Tagged

: Indicates that the port sends the traffic of the VLAN without removing the

VLAN tag.

•

Not a Member

: Removes the port from the VLAN.

IMPORTANT:

•

You cannot configure an access port as an untagged member of a nonexistent
VLAN.

•

When you configure an access port as a tagged member of a VLAN, or

configure a trunk port as an untagged member of multiple VLANs in bulk, the link
type of the port is automatically changed into hybrid.

•

You can configure a hybrid port as a tagged or untagged member of a VLAN

only if the VLAN is an existing, static VLAN.

Tagged.

Not a
Member.

VLAN ID

Specify the VLAN to which the port belongs.

Summary of Contents for WA2612-AGN
































































































































































































































































































































































































































































Search results

Summary of Contents for WA2612-AGN

Reviews:

Related manuals for WA2612-AGN

Brands by name

Popular brands

H3C WA2612-AGN, Web-Based Configuration Manual

Search results

Summary of Contents for WA2612-AGN

Reviews:

Related manuals for WA2612-AGN

Brands by name

Popular brands