17
The HyperTerminal window appears.
Figure 19
HyperTerminal window
Logging in through the console port
Power on the AP, and you can see the following information:
System is starting...
Booting Normal Extend BootWare.
…
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.
Logging in through Telnet or web
By default, the Telnet and web functions are enabled. You can use the following default settings to log in
to the web interface:
•
Username
—admin
•
Password
—h3capadmin
•
Management IP address of VLAN-interface 1 of the AP
—192.168.0.50, with the subnet mask
255.255.255.0.
If the default IP address is changed, contact the administrator to get the new IP address, or use the
display vlan 1
command to view the IP address after logging in to the AP from the console port.
NOTE:
For more information about Telnet or web login configuration, see
H3C WA Series Access Points
Configuration Guides.
