![H3C WA2110-AG Quick Start-Up Download Page 15](http://html1.mh-extra.com/html/h3c/wa2110-ag/wa2110-ag_quick-start-up_3135836015.webp)
Quick Start
H3C WA2110-AG Wireless LAN Access Point
Chapter 2 Installation
2-6
I. Wall, Ceiling Mounting
To mount the access point to a wall, follow the given steps below:
1)
Remove the access point from the mounting bracket.
2)
Route the power cable (if you use an external power supply)
and Ethernet cable on the back of the mounting bracket, as
shown in Figure 2-3.
Caution:
For easy installation and removal of the access point from the
mounting bracket, make sure that there is sufficient flexibility with the
cable and that the cable is long enough. If not enough cable is routed
through the back of the mounting bracket, or if the cable is inflexible, it
can be difficult to install or remove the access point from the mounting
bracket.
Figure 2-3
Cabling on the back
Summary of Contents for WA2110-AG
Page 13: ......
Page 23: ...Compliance and Safety Manual H3C WA2110 AG 1 2...