Operation Manual – Getting Started
H3C VG Series Voice Gateways
Chapter 2 Fundamental Configuration
2-1
Chapter 2 Fundamental Configuration
2.1 Setting up Configuration Environment
2.1.1 Setting up Local Configuration Environment through the Console Port
I. Configuring in Windows 9x
Connect the serial port of the workstation to the Console port of the VG to set up local
configuration environment.
Step 1
: Connect the serial port of the workstation to the Console port of the VG with
RS-232 cable. See Figure 2-1.
Workstation
Console
RS-232
VG
Console cable
Workstation
Console
RS-232
VG
Console cable
Figure 2-1
Setting up local configuration environment through Console port
Step 2
: Start terminal emulation program on the workstation, for example,
HyperTerminal on Windows 9x, to set up new connection. Configure the following
parameters for the RS232 serial port: Baudrate as 9600, data bit as 8, stop bit as 1,
parity as none, flow control as none and terminal emulation type as VT100. See Figure
2-2, Figure 2-3, Figure 2-4 and Figure 2-5 (HyperTerminal on Windows 9x).
Figure 2-2
Setting up new connection
