3-14
(12) On the screen shown in
, select
View Associated Drives
, and press
Enter
. Then,
you can view the details of the RAID (including the RAID name, level, and disk information).
图
3-21
Selecting View Associated Drives
3. Configuring a Hot Spare Disk
After RAID is configured, hot spare disks are usually configured to improve data security. You can
configure a global hot spare disk or a dedicated hot spare disk as required.
Note
•
Hot spares are used only for redundant RAID levels.
•
The capacity of the hot spare must be larger than the capacity of a single member disk of the
RAID contributed to that RAID.
•
Only disks in Unconfigured Good configuration mode can work as hot spare disks.
•
Configuring a global hot spare disk
(1)
On the RAID card configuration screen, select
Drive Management
and press
Enter
, as
shown in
