6-35
Figure 6-41 Installing the diagnostic panel
5.
Install the removed security bezel. For more information, see "
6.
Connect the power cord. For more information, see "
7.
Power on the server. For more information, see "
Installing processors
Guidelines
•
To avoid damage to the processors or main board, only H3C-authorized personnel and
professional server engineers are allowed to install a processor.
•
Make sure the processors are the same model if multiple processors are installed.
•
The pins in the processor socket are very fragile. Make sure a processor socket cover is
installed on an empty processor socket.
•
To avoid ESD damage, put on an ESD wrist strap before performing this task, and make sure
the wrist strap is reliably grounded.
•
To ensure good ventilation of the processors, do not install any PCIe modules in a 24SFF
compute module installed with 8180, 8180M, 8168, 6154, 6146, 6144, or 6244 processors.
•
For the server to operate correctly, make sure processor 1 of compute module 1 is always in
position.
•
The server provides four processor sockets for processor installation. Identify the installation
locations of processors as shown in
.
