H3C UniServer R6900 G3, User Manual

Page: 62 / 214

6-28
Figure 6-33 Installing the internal threaded stud
b.
Insert the connector of the SSD into the socket, and push down the other end of the SSD.
Then, fasten the screw provided with the transfer module to secure the SSD into place, as
shown in
Figure 6-34 .
Figure 6-34 Installing a PCIe M.2 SSD to the M.2 transfer module
8.
Install the M.2 transfer module to the riser card. For more information, see " Installing a riser
card and a PCIe module in a compute module ."
9.
Install the riser card to the compute module. For more information, see " Installing a riser card
and a PCIe module in a compute module ."
10.
Install the compute module access panel. For more information, see " Replacing a compute
module access panel ."