114
Figure 142 Removing the flash card on the Mezzanine storage controller
8.
Remove cables from the front drive backplanes if they hinder access to the supercapacitor.
9.
Remove the supercapacitor:
{
To remove the supercapacitor in the server chassis, pull the clip on the supercapacitor
holder, take the supercapacitor out of the holder, and then release the clip, as shown
in
. Then, lift the retaining latch at the bottom of the supercapacitor holder, slide
the holder to remove it, and then release the retaining latch, as shown in
Figure 143 Removing the supercapacitor
