H3C UniServer R2700 G3, User Manual

Page: 55 / 226

6-19
Some mLOM Ethernet adapters have only one captive screw. This example uses an mLOM
with two captive screws.
Figure 6-28 Installing an mLOM Ethernet adapter
3.
Connect network cables to the mLOM Ethernet adapter.
4.
Connect the power cord. For more information, see " Connecting the power cord ."
5.
Power on the server. For more information, see " Powering on the server ."
Verifying the installation
Log in to HDM to verify that the mLOM Ethernet adapter is operating correctly. For more information,
see HDM online help.
Installing a PCIe Ethernet adapter
Procedure
1.
Power off the server. For more information, see " Powering off the server ."
2.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
3.
Remove the access panel. For more information, see " Removing the access panel ."
4.
Install the PCIe Ethernet adapter. For more information, see " Installing riser cards and PCIe
modules ."
5.
If the adapter is NCSI-capable and is intended to provide an HDM shared network port, connect
the NCSI cable for the PCIe Ethernet adapter. For more information, see "
Connecting the NCSI
cable for a PCIe Ethernet adapter ."
6.
Connect network cables to the PCIe Ethernet adapter.
7.
Install the access panel. For more information, see " Installing the access panel ."
8.
Rack-mount the server. For more information, see " Rack-mounting the server ."
9.
Connect the power cord. For more information, see " Connecting the power cord ."
10.
Power on the server. For more information, see " Powering on the server ."
Verifying the installation
Log in to HDM to verify that the PCIe Ethernet adapter is operating correctly. For more information,
see HDM online help.