6-11
Figure 6-16 Installing a Mezzanine storage controller
7.
Install the flash card of the power fail safeguard module to the storage controller:
IMPORTANT:
Skip this step if no power fail safeguard module is required or the storage controller has a
built-in flash card. For information about storage controllers with a built-in flash card, see
"Storage controllers."
a.
Install the two internal threaded studs supplied with the power fail safeguard module on the
Mezzanine storage controller, as shown in
.
Figure 6-17 Installing the internal threaded studs
b.
Use screws to secure the flash card onto the storage controller, as shown in