8-2
Figure 8-2 4LFF SAS/SATA drive connected to the Mezzanine storage controller
(1) Power cord
(2) AUX signal cable
(3) SAS/SATA data cable
Figure 8-3 4LFF SAS/SATA drive connected to a standard storage controller
(1) Power cord
(2) AUX signal cable
(3) SAS/SATA data cable
NOTE:
The standard storage controller must be installed in PCIe slot 1.
Front 4LFF SAS/SATA and rear 2SFF SAS/SATA drive cabling
Use
to select the method for connecting the front 4LFF SAS/SATA drive backplane and the
rear 2SFF SAS/SATA drive backplane to a storage controller depending on the type of the storage
controller.
Table 8-2 Front 4LFF SAS/SATA and rear 2SFF SAS/SATA drive cabling methods
Storage controller
Cabling method
Embedded RSTe RAID controller
See
.
Mezzanine storage controller
See
.