41
Figure 68 Logical Device Configuration screen
Initializing drives
Initializing a drive is to divide a small partition in the drive for saving the RAID information. A raw
drive must be initialized before it is used for creating a RAID array or configured as a hot spare
drive.
To initialize drives:
1.
On the PMC RAID management screen as shown in
, select
Logical Device
Configuration
, and press
Enter
.
Figure 69 PMC RAID management screen
2.
On the screen as shown in
, select
Initialize Drives
, and press
Enter
.
Summary of Contents for UniServer E3200 G3
