10
Figure 11 Logical Device Configuration screen
Initializing drives
Initializing a drive is to divide a small partition from the drive for saving the RAID information. A raw
drive must be initialized before it can be used for creating a RAID array or configured as a hot spare
drive.
To initialize drives:
1.
On the storage controller configuration screen as shown in
, select
Logical Device
Configuration
, and press
Enter
.
Figure 12 Storage controller configuration screen
2.
On the screen as shown in
, select
Initialize Drives
, and press
Enter
.
Summary of Contents for UniServer B5700 G3
