82
Shutting down an aggregate interface
Shutting down or bringing up an aggregate interface affects the aggregation state and link state of ports
in the corresponding aggregation group in the following ways:
•
When an aggregate interface is shut down, all Selected ports in the corresponding aggregation
group become unselected and their link state becomes down.
•
When an aggregate interface is brought up, the aggregation state of ports in the corresponding
aggregation group is recalculated and their link state becomes up.
To shut down an aggregate interface:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter aggregate interface
view.
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
•
Enter Layer 3 aggregate interface
or subinterface view:
interface route-aggregation
{ interface-number |
interface-number.subnumber }
Use either command.
3.
Shut down the aggregate
interface or subinterface.
shutdown
By default, aggregate interfaces
or subinterfaces are up.
NOTE:
Shutting down an aggregate subinterface does not affect any aggregation group, because an aggregate
subinterface does not have an associated aggregation group.
Restoring the default settings for an aggregate interface
To restore the default settings for an aggregate interface:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter aggregate interface
view.
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
•
Enter Layer 3 aggregate interface
or subinterface view:
interface route-aggregation
{ interface-number |
interface-number.subnumber }
Use either command.
3.
Restore the default settings for
the aggregate interface or
subinterface.
default
N/A
