374
Figure 130 Network diagram
Configuration prerequisites
•
Configure IP addresses for the host, router, and servers as shown in
and make sure
they can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
Configuring the portal server on IMC PLAT 7.1
In this example, the portal server runs on IMC PLAT 7.1(E0303), IMC EIA 7.1(F0303), and IMC EIP
7.1(F0303).
1.
Configure the portal authentication server:
a.
Log in to IMC and click the
User
tab.
b.
Select
User
Access Policy
>
Portal Service
>
Server
from the navigation tree to open the
portal server configuration page, as shown in
c.
Configure the portal server parameters as needed.
This example uses the default values.
d.
Click
OK
.
Figure 131 Portal authentication server configuration
2.
Configure the IP address group:
