73
Figure 81 Pressing the eject button to eject the CF card
4.
Install a new CF card. For more information, see "
."
To protect the CF card, place it into an antistatic bag.
Replacing a transceiver module
WARNING!
•
Do not stare into the optical fibers.
•
When removing a transceiver module, do not touch the golden finger of the transceiver module.
To replace a transceiver module:
1.
Remove the optical fibers from the transceiver module.
2.
Pivot the clasp down to the horizontal position.
3.
As shown in
, holding the handle of the transceiver module, gently pull the transceiver
module out.
4.
Insert the plastic plug to the removed transceiver module, and put the transceiver module into
its original shipping materials.
5.
If you do not install a new transceiver module in the interface, install a dust-proof plug in the
interface. To install a transceiver module, see "
Figure 82 Removing a transceiver module