10
•
Prepare a 19-inch rack. For more information about how to install a rack, see the installation
guide provided with the rack.
•
Make sure the rack is sturdy and securely grounded.
•
Make sure there is sufficient clearance around the rack for heat dissipation and installation.
•
Make sure there is no debris inside or around the rack.
•
Move the router to a place near the rack.
IMPORTANT:
•
To mount multiple devices in a rack, install the heavier equipment at the lower half of the rack.
•
The SR6608 router is heavy. For rack stability, install it at a lowest possible position.
Installing the router in a 19-inch rack
This section uses an SR6604 as an example.
Attaching cage nuts to the rack
1.
Determine where to install the router in the rack, and then install a rack shelf on the rack.
2.
As shown in
, mark the positions of cage nuts on the front rack posts by using a front
mounting bracket.
Figure 4 Marking the positions of the cage nuts
3.
As shown in
, attach the cage nuts to the marked positions on the rack posts.