H3C SR6600 SPE-FWM, Vxlan Command Reference

Page: 37 / 45

31
Field Description
Last 300 seconds output rate Average output rate for the last 300 seconds.
Input: 0 packets, 0 bytes, 0 drops
Incoming traffic statistics on the interface:
•
Number of incoming packets.
•
Number of incoming bytes.
•
Number of dropped incoming packets.
Output: 0 packets, 0 bytes, 0 drops
Outgoing traffic statistics on the interface:
•
Number of outgoing packets.
•
Number of outgoing bytes.
•
Number of dropped outgoing packets.
# Display brief information about all VSI interfaces.
<Sysname> display interface vsi-interface brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Primary IP Description
Vsi100 DOWN DOWN --
# Display brief information and complete description for VSI-interface 100.
<Sysname> display interface vsi-interface 100 brief description
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Primary IP Description
Vsi100 UP UP 1.1.1.1 VSI-interface100
# Displays interfaces that are physically down and the down reason.
<Sysname> display interface brief down
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Vsi100 DOWN Administratively
Vsi200 DOWN Administratively
Table 9 Command output
Field Description
Interface Abbreviated interface name.
Link
Physical link state of the interface:
•
UP —The interface is physically up.
•
DOWN —The interface is physically down.
•
ADM —The interface has been shut down by using the
shutdown
command. To restore the physical state of the interface, use
the
undo shutdown command.
•
Stby —The interface is a backup interface in standby state. To see the
primary interface, use the display interface-backup
state command.
Protocol
Data link layer protocol state of the interface:
•
UP —The data link layer protocol of the interface is up.
•
UP (s) —The data link layer protocol of the interface is up, but the link