34
Field
Description
•
IN6P_IPV6_V6ONLY
—Only supports IPv6 protocol stack.
•
IN6P_PKTINFO
—Receives the source IPv6 address and input
interface of the packet.
•
IN6P_HOPLIMIT
—Receives the hop limit.
•
IN6P_HOPOPTS
—Receives the hop-by-hop options extension
header.
•
IN6P_DSTOPTS
—Receives the destination options extension
header.
•
IN6P_RTHDR
—Receives the routing extension header.
•
IN6P_RTHDRDSTOPTS
—Receives the destination options
extension header preceding the routing extension header.
•
IN6P_TCLASS
—Receives the traffic class of the packet.
•
IN6P_AUTOFLOWLABEL
—Attaches a flow label automatically.
•
IN6P_RFC2292
—Uses the API specified in RFC 2292.
•
IN6P_MTU
—Discovers differences in the MTU size of every link
along a given data path. TCP does not support this flag.
•
INP_RCVMACADDR
—Receives the MAC address of the frame.
•
INP_SYNCPCB
—Waits until Internet PCB is synchronized.
•
N/A
—None of the above flags.
Inpcb extflag
Extension flags in the Internet PCB:
•
INP_EXTRCVPVCIDX
—Records the PVC index of the received
packet.
•
INP_RCVPWID
—Records the PW ID of the received packet.
•
N/A
—None of the above flags.
Inpcb vflag
IP version flags in the Internet PCB:
•
INP_IPV4
—IPv4 protocol.
•
INP_IPV6
—IPv6 protocol.
•
INP_IPV6PROTO
—Creates an Internet PCB based on IPv6
protocol.
•
INP_TIMEWAIT
—In
TIMEWAIT
state.
•
INP_ONESBCAST
—Sends broadcast packets.
•
INP_DROPPED
—Protocol dropped flag.
•
INP_SOCKREF
—Strong socket reference.
•
INP_DONTBLOCK
—Do not block synchronization of the Internet
PCB.
•
N/A
—None of the above flags.
Hop limit
Hop limit in the Internet PCB.
Send VRF
VRF from which packets are sent.
Receive VRF
VRF from which packets are received.
ipv6 address
Use
ipv6 address
to configure an IPv6 global unicast address for an interface.
Use
undo ipv6 address
to delete an IPv6 global unicast address of the interface.
Syntax
ipv6 address
{
ipv6-address prefix-length
|
ipv6-address
/
prefix-length
}
undo ipv6 address
[
ipv6-address prefix-length
|
ipv6-address
/
prefix-length
]
Summary of Contents for SOHO IE4300
