H3C SOHO IE4300, Command Reference Manual

Page: 541 / 3296

12
Usage guidelines
You cannot create or delete the system default VLAN (VLAN 1) or reserved VLANs.
Before you delete a dynamic VLAN or a VLAN locked by an application, you must first remove the
configuration from the VLAN.
Examples
# Create VLAN 2 and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2]
# Create VLAN 2 and VLANs 4 through 100.
<Sysname> system-view
[Sysname] vlan 2 4 to 100
Related commands
display vlan
Port-based VLAN commands
display port
Use
display port
to display information about hybrid or trunk ports.
Syntax
display port { hybrid | trunk }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hybrid
: Specifies hybrid ports.
trunk
: Specifies trunk ports.
Examples
# Display information about hybrid ports.
<Sysname> display port hybrid
Interface PVID VLAN Passing
GE1/0/1 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about trunk ports.
<Sysname> display port trunk
Interface PVID VLAN Passing
GE1/0/2 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,