H3C SOHO IE4300, Command Reference Manual

Page: 2784 / 3296

7
remote ip remote-ip-address
: Specifies the destination IP address of the BFD echo packets.
The specified IP address must be the IP address of a directly connected interface.
local ip local-ip-address
: Specifies the source IP address of the BFD echo packets. The
specified IP address must be the IP address of a directly connected interface.
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
bfd echo
in this
command.
To enter the view of an existing track entry, use the
track track-entry-number
command. The
tracked object type is not required.
To modify the settings of a track entry, execute the
undo track
command to remove the track entry,
and then execute the
track bfd echo
command again.
When you associate Track with BFD, the virtual IP address of a VRRP group cannot be the local or
remote address of a BFD session.
Examples
# Associate track entry 1 with an echo-mode BFD session. The BFD echo packets use destination IP
address 1.1.1.1, source IP address 1.1.1.2, and outgoing interface VLAN-interface 2.
<Sysname> system-view
[Sysname] track 1 bfd echo interface vlan-interface 2 remote ip 1.1.1.1 local ip 1.1.1.2
[Sysname-track-1]
Related commands
delay
display track
track cfd
Use
track cfd
to create a track entry associated with CFD and enter Track view, or enter the view
of an existing track entry.
Use
undo track
to remove the track entry and all its settings.
Syntax
track track-entry-number cfd cc service-instance instance-id mep mep-id
undo track track-entry-number
Default
No track entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number
: Specifies the track entry ID in the range of 1 to 1024.
service-instance instance-id
: Specifies a service instance by its ID in the range of 1 to
32767.
mep mep-id : Specifies a MEP by its ID in the range of 1 to 8191.