H3C SOHO IE4300, Command Reference Manual

Page: 2691 / 3296

7
preemption delay
Use
preemption delay
to set the preemption delay.
Use
undo preemption delay
to restore the default.
Syntax
preemption delay delay
undo preemption delay
Default
The preemption delay is 1 second.
Views
Smart link group view
Predefined user roles
network-admin
Parameters
delay
: Specifies the preemption delay in the range of 0 to 300 seconds.
Usage guidelines
Preemption delay is the period of time that the primary port waits before taking over to collaborate
with the switchover of upstream devices.
The preemption delay configuration takes effect only after a preemption mode is configured.
Examples
# Enable role preemption and set the preemption delay to 10 seconds.
<Sysname> system-view
[Sysname] smart-link group 1
[Sysname-smlk-group1] preemption mode role
[Sysname-smlk-group1] preemption delay 10
Related commands
preemption mode
preemption mode
Use preemption mode to configure a preemption mode for a smart link group.
Use
undo preemption mode
to restore the default.
Syntax
preemption mode { role | speed [ threshold threshold-value ] }
undo preemption mode
Default
No preemption mode is configured for a smart link group.
Views
Smart link group view