H3C SOHO IE4300, Command Reference Manual

Page: 2529 / 3296

14
ipv6 nd raguard apply policy
ipv6 nd raguard role
Use ipv6 nd raguard role to specify the role of the device attached to the interface.
Use undo ipv6 nd raguard role to remove the role of the device attached to the interface.
Syntax
ipv6 nd raguard role { host | router }
undo ipv6 nd raguard role
Default
No role is specified for the device attached to the interface.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
host
: Specifies the host role. The interface attached to a host drops all received RA messages.
router
: Specifies the router role. The interface attached to a router forwards all received RA
messages.
Usage guidelines
Make sure your setting is consistent with the device type. If you are not aware of the attached
device type, do not specify a role for the device.
Examples
# Specify host as the role for the device attached to GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ipv6 nd raguard role host
reset ipv6 nd raguard statistics
Use reset ipv6 nd raguard statistics to clear RA guard statistics.
Syntax
reset ipv6 nd raguard statistics [ interface interface-type
interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number : Specifies an interface by its type and
number. If you do not specify an interface, this command clears RA guard statistics for all interfaces.