H3C SOHO IE4300, Command Reference Manual

Page: 2284 / 3296

37
ipsec profile
Use
ipsec profile
to create an IPsec profile and enter its view, or enter the view of an existing
IPsec profile.
Use
undo ipsec profile
to delete an IPsec profile.
Syntax
ipsec profile profile-name [ manual ]
undo ipsec profile profile-name
Default
No IPsec profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies a name for the IPsec profile, a case-insensitive string of 1 to 63
characters.
manual
: Specifies the IPsec SA setup mode as manual.
Usage guidelines
When you create an IPsec profile, you must specify the IPsec SA setup mode ( manual ). When you
enter the view of an existing IPsec profile, you do not need to specify the IPsec SA setup mode.
A manual IPsec profile is similar to a manual IPsec policy. It is used exclusively for IPsec protection
for application protocols, including OSPFv3 and RIPng.
Examples
# Create a manual IPsec profile named profile1 .
<Sysname> system-view
[Sysname] ipsec profile profile1 manual
[Sysname-ipsec-profile-manual-profile1]
Related commands
display ipsec profile
ipsec redundancy enable
Use
ipsec redundancy enable
to enable IPsec redundancy.
Use
undo ipsec redundancy enable
to disable IPsec redundancy.
Syntax
ipsec redundancy enable
undo ipsec redundancy enable
Default
IPsec redundancy is disabled.